Canon PIXMA MG6820 Setup Printer with Scanner and Wireless – Windows, Linux, Mac

Posted on
Canon PIXMA MG6820

Canon MG6820

Wireless setup without cd

Canon Pixma MG6820 Setup, Manual Instructions, Scanner Driver Software – Canon Pixma MG6820 (Front). The Canon Pixma MG6820 is as great an illustration amongst printers of this as any kind of we’ve seen in the last few years of evaluating. Canon details this printer for a $149.99 MSRP. Some electrical outlets were offering it for that at this November 2015 writing, as well as at that price, it’s playing from its league. We’ve likewise seen some resellers discount it from the gate to around $100, nonetheless, and also right here it’s in a more comfy place.

To show this, nevertheless, we’re initial going to need to get to take a close check out it– both the moles and also the beauty marks.The system is light, however, at about 14 pounds. It’s a good printer for conveniently transferring around your house. Not that you’ll should do this, with its assistance for cordless printing from different mobile devices, however it’s still a beneficial alternative to have readily available.

All the printers in the Pixma line share a basic appearance, in the same way humans in family members do. Each (Pixma, not human) looks rather like the cushions in classic Japanese prints: rectangle-shaped, flawlessly also, with the sides in both upright and inclined planes. This holds just as true for the Canon Pixma MG6820. In glossy black or white, it doesn’t look like stodgy office equipment in a residence or office, as well as its sleek lines are no eyesore. (Canon likewise supplies the Canon Pixma MG6820 in duo-tone black/silver and also white/silver varieties, with the lid part decorated with the silver plastic.).

With a height of nearly 6 inches, a width of 18 inches, and a depth of somewhat over 14.5 inches, the Pixma MG6820’s impact is too big for a routine setting on most desks. It additionally needs opening the top to access the scanning bed, which suggests you cannot utilize it under a low rack, and the front slides bent on enable accessibility to its input and also result trays.The former includes an unfolding guide flange. As soon as that is expanded, its depth ends up boosted by an additional 9 inches.As kept in mind over, the top of the Canon Pixma MG6820 opens up, jaw-style, to disclose the flatbed scanner …

The rate factor is an enchanting number. If you assess your market well as well as set prices suitably, in theory the cost must be close to unnoticeable to the prospective buyer, due to the fact that their interest becomes concentrated rather on what your product gives. If you establish it too expensive, however, the demand curve drops like a sinkhole in a street with a damaged water main below. That very same buyer starts functioning contrasts versus your product; as well as though only the rate has altered, it seems to that shopper that it’s the product itself that has. Just what was an appealing buy at a reduced rate now looks less so, due to the new firm it maintains.

Recommended: Canon PIXMA MG6821 Driver Download


Operating System:

  • Windows Vista SP1, Vista SP2
  • Windows XP SP3 32-bit
  • Windows 7, Windows 7 SP1
  • Windows 10
  • Windows 8
  • Linux
  • Mac OS X v10.6.8- v10.9, Mac OS 10.12(Sierra)

Canon  PIXMA MG6820 Ink:

  • PG-245 XL XL Black Ink
  • CL-246 XL XL Color Ink
  • PG-245 Black Ink Cartridge
  • CL-246 Color Ink Cartridge

How to Set Up Wireless Connection on Your Canon PIXMA MG6820 :

Setting up wireless connection of Canon PIXMA  on your computer is actually pretty easy. This article will describes the steps to install wireless connection using WPS connection method. There are some requirements that need to be fulfilled before starting the installation, such as your access point should have a physical WPS push button and your network should use the WPA2 security protocol or WPA.

  1. First, turn on the printer. Press and hold on the Wi-Fi button until the indicator lamp flashes once. Make sure it flash blue light.
  2. Press the WPS button on your access point within 2 minutes. The blue light will continue flashing while looking for your access point.
  3. Once it connects to the access point, the power and Wi-Fi lamp will flash.
  4. If the process is successful, both the power and Wi-Fi lamp will stop flashing and remain lit.
  5. To confirm whether the process is successful or not, try to print out the network settings of your printer.
  6. Put a sheet of paper.
  7. Press and hold the Resume/Cancel button until the indicator lamp flashes 15 times, then release it.
  8. Your printer will print the network information page and it means the installation is successful.

Canon PIXMA MG6820 Printer Setup on Windows Computer:

For some people, setting up a printer on computer can be a hassle. This article will explain how to set up your Canon PIXMA printer to a computer with Windows operating system. Every printer should have a driver CD in its packages, so make sure you check it before.

  1. Insert the CD that came in the package
  2. Follow the installation wizard
  3. Once its finish, test your printer to make sure it’s working

There is also an option to set up your Canon PIXMA without installing extra software by following the steps below:
Connect your printer via USB cable.

  1. Open Control Panel, and double-click the Printers or Printers and Fax icon.
  2. A new window will occur, then choose Add a printer icon.
  3. A Windows Printer Wizard will appear, then click Next to start the wizard.
  4. There will be choices of installing a Local or Network printer. Choose Local printer attached to this printer, then click Next.
  5. A prompt for printer driver’s location will appear. Choose the directory of your driver or click on the printer CD.
  6. After the installation is finished, test your printer by right-click the printer icon and click properties. In that window, choose Print Test Page. Your printer should work properly.

Canon PIXMA MG6820 Printer Setup on Mac:
Setting up Canon PIXMA on Mac can be a bit difficult for some people due to several differences from the installation on Windows OS. This article will give you a brief explanation on how to set up your Canon PIXMA printer on Mac OS.

  1. First, you have to uninstall any other Canon driver that exist in your Mac
  2. Disconnect your printer.
  3. Download the software driver on Canon official website.
  4. Open the driver and follow the installation wizards.
  5. After the installation is finished, go to the system preference by clicking Apple icon at the top right.
  6. Connect your printer via USB port and turn it on.
  7. Open Print and Fax and click on the plus button on the left side of the window to add a printer. Your new printer should appear on the list. If you didn’t find your printer name, redo step 1 to step 6 and make sure the driver for your current printer is installed properly.
  8. Click on your current printer model and click Choose a Driver or Printer Model, and then click Select Printer Software.
  9. Choose your printer from the list and click OK.
  10. Your printer should work properly.

Canon PIXMA MG6820 Driver Download:

Name Drivers and Operating System
Canon PIXMA MG 6820 series Full Driver & Software Package (Windows/Vista/XP)
Canon PIXMA MG 6820 series MP Drivers Ver. 1.02 (Windows/Vista/XP)
Canon PIXMA MG 6820 series XPS Printer Driver Ver. 5.70 (Windows)
Canon PIXMA MG 6820 Easy-PhotoPrint EX Ver.4.7.0 (Windows)
Canon PIXMA MG 6820 My Image Garden Software Ver.3.5.1 (Windows)
Canon PIXMA MG 6820 series Full Driver & Software Package Ver. 1.2(Mac OS X )
Canon PIXMA MG 6820 series CUPS Printer Driver Ver. (Mac)
Canon PIXMA MG 6820 ICA Driver Ver.4.1.3 (Mac)
Canon PIXMA MG 6820 My Image Garden Ver.3.5.1 (Mac)
Canon PIXMA MG 6820 IJ Scan Utility Software Ver.2.3.4 (Mac)
Canon PIXMA MG 6820 series IJ Printer Driver Ver. 4.00 (Linux)
Canon PIXMA MG 6820 series ScanGear MP Ver. 2.20 (Linux)

Leave a Reply